This high-performance Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured for demanding applications in aerospace, medical, and industrial sectors.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.220" |
| Length | 30" |
| Width | 33" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.220 inches in thickness, 30 inches in length, and 33 inches in width. Exhibiting a minimum tensile strength of 120 ksi and a yield strength of 110 ksi, this alloy boasts excellent biocompatibility and resistance to chloride-induced corrosion. Its operational temperature range extends to approximately 600°F (316°C). Suitable for machining, forming, and welding, this sheet is an excellent choice for critical components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the workpiece surface is clean and free of contaminants. 2. Properly support the sheet during cutting or forming operations to prevent distortion. 3. Follow recommended welding procedures for Titanium Grade 5 if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper handling leading to surface scratches or contamination. | Wear clean gloves when handling the titanium sheet and avoid contact with abrasive materials. |
| Using incorrect tooling or speeds when machining, causing excessive heat or tool wear. | Consult machining guides for Titanium Grade 5 and utilize appropriate cutting fluids and speeds. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace components (airframes, engine parts), Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||