This Titanium Grade 5 stock sheet is engineered for critical hydraulic systems. Its exceptional strength-to-weight ratio and superior corrosion resistance ensure longevity and optimal performance under extreme conditions.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.218" |
| Length | 18" |
| Width | 36" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts dimensions of 0.218 inches thick, 18 inches in length, and 36 inches in width. It offers an excellent combination of high tensile strength (typically 120-130 ksi), good ductility, and outstanding fatigue strength, making it ideal for high-pressure hydraulic manifolds, pump components, and valve bodies where weight reduction and resistance to aggressive media are paramount. Its non-magnetic properties further enhance its suitability for specialized hydraulic environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free of contaminants. 2. Precisely machine the sheet to required component dimensions using appropriate cutting tools and coolant. 3. Perform any necessary finishing or surface treatments as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners with titanium components. | Always use compatible titanium or high-grade stainless steel fasteners to prevent galvanic corrosion and ensure structural integrity. |
| Inadequate coolant during machining. | Employ sufficient coolant flow and appropriate cutting speeds to prevent tool wear and overheating, which can compromise material properties. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifolds, Hydraulic pump and valve components, Aerospace hydraulic systems, Marine hydraulic applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||