This Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and exceptional corrosion resistance, making it ideal for critical hydraulic systems where reliability is paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.217" |
| Length | 29" |
| Width | 19" |
Precision-manufactured to tight tolerances, this 0.217-inch thick, 29-inch long, and 19-inch wide Titanium Grade 5 (Ti-6Al-4V) sheet provides exceptional mechanical properties. Exhibiting a tensile strength typically exceeding 130 ksi and a yield strength above 120 ksi, it offers excellent resistance to fatigue and stress corrosion cracking. Its biocompatibility and low density further enhance its suitability for advanced hydraulic manifolding, pressure vessels, and components exposed to aggressive fluid environments, ensuring longevity and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with hydraulic fluid and operating environment. 2. Cut to precise dimensions using appropriate tooling for titanium alloys. 3. Deburr all edges to prevent stress risers and ensure smooth fluid flow.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium. | Employ carbide or diamond-tipped tooling with appropriate coolant and feed rates to prevent excessive heat and tool wear. |
| Insufficient edge preparation after cutting. | Thoroughly deburr all cut edges to a smooth radius, eliminating sharp corners that could initiate cracks. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic Manifold Blocks, High-Pressure Hydraulic Tubing, Corrosion-Resistant Hydraulic Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||