This Titanium Grade 5 stock sheet is engineered for exceptional performance in severe industrial conditions. Its superior strength-to-weight ratio and corrosion resistance make it ideal for critical pulling and lifting applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.216" |
| Length | 15" |
| Width | 33" |
A high-performance industrial component, this Titanium Grade 5 stock sheet (ASTM B265) offers a remarkable combination of strength, low density, and exceptional corrosion resistance. With a thickness of 0.216 inches, a length of 15 inches, and a width of 33 inches, it meets stringent aerospace and industrial standards. The Ti-6Al-4V alloy provides a tensile strength exceeding 130 ksi and a yield strength over 120 ksi, ensuring structural integrity under extreme loads and harsh chemical environments. Its biocompatibility and non-magnetic properties further extend its utility.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper surface preparation of mating components. 2. Utilize appropriate welding procedures for Titanium Grade 5, such as TIG or electron beam welding. 3. Employ controlled cooling to prevent residual stresses.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners with Titanium Grade 5. | Employ titanium or specialized corrosion-resistant fasteners to prevent galvanic corrosion. |
| Inadequate heat treatment or post-weld annealing. | Follow recommended heat treatment protocols to maintain material properties and relieve stresses. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Offshore lifting equipment components, Aerospace structural elements in corrosive atmospheres, High-strength marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||