This high-performance Titanium Grade 5 stock sheet offers exceptional strength and corrosion resistance, making it ideal for critical components in demanding Heating & Cooling systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.190" |
| Length | 37" |
| Width | 44" |
A proven choice for industrial professionals, this Titanium Grade 5 stock sheet is engineered to meet the rigorous demands of the Heating & Cooling sector. Measuring 0.190 inches thick, 37 inches in length, and 44 inches in width, it provides substantial material for fabricating robust components. Titanium Grade 5 (Ti-6Al-4V) is renowned for its superior strength-to-weight ratio, excellent fatigue strength, and outstanding resistance to corrosive environments, particularly those involving chlorides and elevated temperatures, ensuring longevity and reliability in HVAC systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper surface preparation of both the sheet and mating components, removing all contaminants. 2. Utilize appropriate welding or fastening techniques suitable for Titanium Grade 5, considering inert gas shielding if welding. 3. Verify dimensional accuracy and structural integrity after installation to ensure optimal performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication tools without proper adaptation, leading to material contamination or damage. | Employ dedicated tools for titanium fabrication or ensure thorough cleaning of shared equipment to prevent cross-contamination. |
| Insufficient weld penetration or improper shielding gas during welding, compromising joint strength. | Follow established welding procedures for Titanium Grade 5, ensuring adequate penetration and a consistent argon shielding gas flow. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchanger Components, Condenser Tubing, Evaporator Plates, Chiller Components, Ductwork in Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||