This Titanium Grade 5 stock sheet, measuring 0.188" thick by 26" long and 20" wide, offers exceptional performance for critical heating and cooling systems. Its superior properties ensure longevity and reliability in demanding environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.188" |
| Length | 26" |
| Width | 20" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet exhibits a minimum tensile strength of 132,000 psi and yield strength of 120,000 psi, with a density of 0.163 lb/in³. Its exceptional corrosion resistance in oxidizing and chloride media makes it ideal for heat exchangers, condensers, and other components exposed to aggressive thermal and chemical conditions. The 0.188" thickness, 26" length, and 20" width provide a robust substrate for fabrication in aerospace, marine, and industrial HVAC sectors requiring high-temperature stability and lightweight design.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of contaminants. 2. Fabricate to design specifications using appropriate welding or joining techniques for Titanium Grade 5. 3. Perform post-fabrication inspection for integrity and dimensional accuracy.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel welding procedures. | Utilize inert gas welding (e.g., TIG) with proper shielding gas to prevent contamination and embrittlement. |
| Inadequate surface preparation before joining. | Thoroughly degrease and mechanically clean the titanium surfaces to remove oxides and contaminants. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchanger Components, Condenser Tubing & Plates, Aerospace Fluid Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||