This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it the material of choice for critical pulling and lifting applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.181" |
| Length | 12" |
| Width | 42" |
A proven choice for industrial professionals, this Titanium Grade 5 (Ti-6Al-4V) stock sheet features a nominal thickness of 0.181 inches, a length of 12 inches, and a width of 42 inches. Renowned for its excellent mechanical properties, including high tensile strength and fatigue resistance, coupled with outstanding biocompatibility and corrosion resistance in marine and chemical environments, this alloy is engineered for extreme performance. Its lightweight nature significantly enhances maneuverability and reduces structural load in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Ensure proper tooling and cutting techniques are employed to avoid material damage or contamination. 3. Integrate sheet into the pulling or lifting assembly following established engineering drawings and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium, leading to excessive heat and material hardening. | Employ carbide or high-speed steel tooling with appropriate coolant and feed rates specifically recommended for machining titanium alloys. |
| Inadequate surface preparation before joining or welding, compromising structural integrity. | Thoroughly clean the titanium surface using approved degreasers and abrasive methods to remove any oxides or contaminants prior to fabrication. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Customized lifting beams and frames, Componentry for specialized winches and hoists, Reinforcement plates in high-stress pulling mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||