This Titanium Grade 5 stock sheet is engineered for demanding pressure and temperature control systems. Its exceptional strength-to-weight ratio and superior corrosion resistance make it ideal for critical industrial environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.168" |
| Length | 15" |
| Width | 22" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.168 inches in thickness, 15 inches in length, and 22 inches in width. Designed for extreme operational parameters, it exhibits an excellent balance of strength, toughness, and fatigue resistance, making it suitable for high-pressure vessels, heat exchangers, and cryogenic applications. The material's inherent passivation layer provides unparalleled resistance to a wide range of corrosive media, including saltwater, acids, and chlorides, ensuring longevity and reliability in harsh environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, free of debris, and properly prepared according to industry standards for Titanium Grade 5. 2. Utilize appropriate fasteners and welding procedures specifically recommended for Titanium Grade 5 to maintain material integrity and prevent galvanic corrosion. 3. Conduct thorough leak testing and pressure/temperature verification after installation to confirm system performance and safety.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard welding practices not suitable for titanium alloys. | Employ inert gas shielding (e.g., Argon) and specialized welding techniques designed for Titanium Grade 5 to prevent contamination and embrittlement. |
| Inadequate surface preparation leading to poor joint integrity. | Thoroughly degrease and mechanically clean all surfaces to be joined or in contact with the sheet, removing any oxides or contaminants. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel fabrication, Heat exchanger components, Cryogenic system parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||