This Titanium Grade 5 stock sheet is engineered for demanding pressure and temperature control applications. Its exceptional strength-to-weight ratio and superior corrosion resistance make it ideal for critical system components.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.139" |
| Length | 45" |
| Width | 31" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 stock sheet offers exceptional performance in corrosive and high-temperature environments. With precise dimensions of 0.139 inches thickness, 45 inches length, and 31 inches width, it meets stringent industry requirements for pressure vessels, heat exchangers, and critical piping systems. Grade 5 titanium alloy (Ti-6Al-4V) provides an unparalleled combination of high tensile strength, excellent fracture toughness, and superior resistance to a wide range of aggressive media, ensuring longevity and reliability under extreme operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from contaminants. 2. Apply appropriate sealant or gasket material as per system design specifications. 3. Securely fasten the sheet using specified hardware, adhering to torque recommendations to prevent over-stressing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to seal failure. | Thoroughly degrease and clean all contact surfaces before installation. |
| Over-tightening fasteners, causing localized stress concentrations. | Utilize a calibrated torque wrench and follow manufacturer-recommended torque values for all fasteners. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel fabrication, Heat exchanger components, Corrosion-resistant piping systems, Aerospace fluid handling, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||