This Titanium Grade 5 stock sheet provides exceptional strength, corrosion resistance, and biocompatibility, ideal for high-pressure hydraulic systems and demanding environments where failure is not an option.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.118" |
| Length | 19" |
| Width | 25" |
Engineered for reliability and performance, this Titanium Grade 5 stock sheet measures 0.118 inches thick, 19 inches in length, and 25 inches in width. Composed of Ti-6Al-4V alloy, it offers a minimum tensile strength of 130 ksi and yield strength of 120 ksi, with excellent fatigue strength and a density approximately 60% that of steel. Its inherent passivation layer provides superior resistance to a wide range of corrosive media, making it suitable for aerospace, marine, and medical hydraulic components where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the hydraulic fluid and operating environment. 2. Ensure proper cleaning and surface preparation prior to cutting or forming. 3. Adhere to industry-standard welding and fabrication procedures for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication techniques without accounting for titanium's unique properties. | Employ specialized tooling and techniques for cutting, forming, and welding titanium to prevent work hardening and ensure structural integrity. |
| Inadequate cleaning leading to contamination during assembly. | Thoroughly degrease and clean all surfaces with approved solvents before and during assembly to prevent premature corrosion or component failure. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold blocks, Cylinder components in corrosive environments, Sealing surfaces and fluid conduits in aerospace hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||