This high-performance Titanium Grade 5 sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Ideal for demanding aerospace, medical, and industrial applications requiring ultimate reliability and durability.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.102" |
| Length | 39" |
| Width | 42" |
Trusted by engineers across multiple sectors, this Titanium Grade 5 (Ti-6Al-4V) stock sheet is manufactured to exacting standards. Dimensions include a nominal thickness of 0.102 inches, a length of 39 inches, and a width of 42 inches. This alloy exhibits excellent tensile strength, low density, and remarkable biocompatibility, making it the material of choice for critical components in aerospace structures, medical implants, and high-corrosion environments. Its workability and weldability further enhance its utility in complex fabrication projects.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications against project requirements. 2. Utilize appropriate cutting and forming tools designed for titanium alloys. 3. Ensure proper surface preparation and welding procedures if applicable, adhering to industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools, leading to excessive wear and poor cut quality. | Employ carbide-tipped or diamond-coated tooling specifically designed for titanium alloys, and use appropriate coolants. |
| Inadequate surface preparation before welding, resulting in porosity and reduced weld strength. | Thoroughly degrease and clean the weld area with a non-oil-based solvent and consider inert gas purging to prevent oxidation. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||