This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to 0.085" thickness, 24" length, and 17" width, it is engineered for demanding environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.085" |
| Length | 24" |
| Width | 17" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a nominal thickness of 0.085 inches, a length of 24 inches, and a width of 17 inches. Exhibiting an ultimate tensile strength typically exceeding 130 ksi and a yield strength of 120 ksi, coupled with excellent fatigue strength and fracture toughness, this alloy is ideal for applications demanding high performance under severe conditions. Its inherent biocompatibility and resistance to a wide range of corrosive media make it a preferred material for critical components in aerospace, medical implants, chemical processing, and marine hardware. The sheet is manufactured to strict aerospace and industrial standards.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and shaping tools are suitable for titanium alloys and properly calibrated. 2. Clean surfaces thoroughly to remove any contaminants before fabrication or assembly. 3. Follow recommended welding or joining procedures for Titanium Grade 5, utilizing appropriate shielding gases and filler materials if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper lubrication. | Utilize carbide or high-speed steel tooling with a copious amount of cutting fluid designed for titanium to prevent overheating and tool wear. |
| Improper surface preparation leading to contamination during welding. | Degrease and mechanically clean the titanium surface immediately before welding to prevent embrittlement from atmospheric contaminants. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||