High-performance Titanium Grade 5 (Ti-6Al-4V) stock sheet, precisely manufactured to 0.084" thickness, 30" length, and 22" width. Renowned for its exceptional strength, low density, and excellent corrosion resistance.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.084" |
| Length | 30" |
| Width | 22" |
Specified by design engineers worldwide, this Titanium Grade 5 stock sheet offers a compelling combination of strength, toughness, and biocompatibility. With a nominal thickness of 0.084 inches, a length of 30 inches, and a width of 22 inches, it conforms to rigorous industry standards. The Ti-6Al-4V alloy exhibits a high tensile strength and fatigue resistance, making it ideal for critical components in aerospace structures, surgical implants, and high-stress industrial equipment where weight reduction and environmental stability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting tool is appropriately rated for titanium alloys to prevent premature wear. 2. Clean the sheet surface thoroughly to remove any contaminants that could compromise subsequent fabrication processes. 3. Follow established machining parameters for Titanium Grade 5 to achieve desired tolerances and surface finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools, leading to rapid tool degradation and poor cut quality. | Employ specialized carbide or high-speed steel tooling designed for titanium machining, and utilize appropriate coolant. |
| Insufficient surface preparation before welding or bonding, resulting in compromised joint integrity. | Thoroughly degrease and abrade the contact surfaces to ensure optimal adhesion or weld penetration. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and prosthetics, High-performance industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||