This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for demanding heating and cooling applications where durability is paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.069" |
| Length | 17" |
| Width | 39" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.069 inches in thickness, 17 inches in width, and 39 inches in length. This alloy exhibits excellent biocompatibility, high tensile strength, and outstanding resistance to oxidation and chloride attack, making it a premium choice for heat exchangers, condenser tubes, and other components exposed to corrosive environments within HVAC systems. Its optimal performance is maintained across a wide temperature range, ensuring reliable operation and extended service life in critical heating and cooling infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants before fabrication. 2. Utilize appropriate cutting tools designed for titanium alloys to maintain edge integrity. 3. Employ welding procedures specific to Titanium Grade 5, if required, ensuring a controlled atmosphere to prevent contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium, leading to edge chipping or excessive heat buildup. | Employ carbide-tipped or diamond-coated cutting tools and maintain appropriate feed rates and lubrication. |
| Inadequate post-fabrication cleaning, leaving residual oils or debris that can initiate corrosion. | Thoroughly degrease and clean all surfaces after fabrication using appropriate industrial cleaning agents. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchanger Components, Condenser Tubing, Evaporator Surfaces, Corrosion-Resistant Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||