This Titanium Grade 5 stock sheet is engineered for demanding hydraulic applications requiring exceptional strength, corrosion resistance, and a high strength-to-weight ratio. Precision-manufactured to meet stringent industry standards for critical fluid power systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.062" |
| Length | 44" |
| Width | 36" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.062 inches in thickness, 44 inches in length, and 36 inches in width. Possessing a minimum tensile strength of 128,000 psi and a yield strength of 120,000 psi, it offers superior performance in corrosive environments and at elevated temperatures, making it ideal for aerospace, marine, and industrial hydraulic components where weight reduction and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from contaminants before cutting or forming. 2. Utilize appropriate tooling designed for titanium alloys to achieve clean cuts and prevent material work hardening. 3. When welding, follow established procedures for Ti-6Al-4V, including inert gas shielding and proper joint preparation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments. | Employ carbide-tipped or diamond-coated cutting tools and maintain a slower feed rate with adequate lubrication to prevent excessive heat buildup and tool wear. |
| Inadequate post-machining cleaning. | Thoroughly degrease and clean all machined surfaces to remove any residual cutting fluids or debris that could compromise corrosion resistance or bonding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic cylinder components, High-pressure fluid lines, Corrosion-resistant valve bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||