This 0.044-inch thick Titanium Grade 5 stock sheet, measuring 48 inches by 13 inches, is engineered for superior performance in demanding hydraulic systems. Its exceptional strength-to-weight ratio and corrosion resistance make it ideal for critical components.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.044" |
| Length | 48" |
| Width | 13" |
Trusted by engineers across multiple sectors, this Titanium Grade 5 stock sheet (ASTM B265 Grade 5, UNS R56400) offers an unparalleled combination of high strength (tensile strength 132,000 psi minimum) and excellent corrosion resistance, particularly in chloride-rich environments common in hydraulic fluid systems. Measuring 0.044" thick, 48" in length, and 13" in width, it's suitable for fabricating seals, housings, and structural elements where weight reduction and long-term reliability are paramount. Its biocompatibility also opens possibilities in specialized hydraulic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the specific hydraulic fluid and operating environment. 2. Precisely cut the sheet to the required dimensions using appropriate tooling designed for titanium alloys. 3. Fabricate components following best practices for titanium welding, machining, and assembly to maintain material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper cooling or lubrication. | Employ specialized carbide or high-speed steel tooling with robust cooling and lubrication systems to prevent excessive heat buildup and tool wear when cutting or machining Titanium Grade 5. |
| Inadequate pre-cleaning of the surface before welding or bonding. | Thoroughly clean the Titanium Grade 5 surface using degreasers and mechanical abrasion to remove any oxides, oils, or contaminants prior to welding or bonding to ensure strong, defect-free joints. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic Cylinder Components, High-Pressure Manifold Blocks, Corrosion-Resistant Hydraulic Housings, Aerospace Hydraulic Systems, Offshore Oil & Gas Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||