This Titanium Grade 5 stock sheet is engineered for superior performance in extreme pulling and lifting environments. Its exceptional strength-to-weight ratio and corrosion resistance make it ideal for critical, high-stress applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.040" |
| Length | 37" |
| Width | 15" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers a nominal thickness of 0.040 inches, a length of 37 inches, and a width of 15 inches. This aerospace-grade alloy provides excellent tensile strength (minimum 130 ksi) and yield strength (minimum 120 ksi) while maintaining remarkable corrosion resistance in aggressive environments, crucial for components subjected to significant mechanical loads and potential exposure to corrosive elements. The material's biocompatibility and fatigue strength further enhance its suitability for demanding pulling and lifting systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Accurately cut to the required dimensions using appropriate tooling for titanium alloys. 3. Securely integrate into the pulling or lifting mechanism, adhering to all load-bearing specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize specialized carbide or diamond-tipped cutting tools and appropriate cooling lubricants to prevent tool wear and material damage. |
| Overlooking the specific tensile and yield strength requirements for the application. | Always verify the calculated stress loads against the material's certified mechanical properties to ensure safety and performance. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom fabricated lifting lugs, Reinforcement plates in winching systems, Components for specialized offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||