This high-performance polycarbonate stock sheet is engineered for demanding pulling and lifting applications. Its exceptional impact strength and optical clarity make it ideal for safety guards and specialized structural components.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.204" |
| Length | 27" |
| Width | 25" |
Built to exacting engineering tolerances, this 0.204-inch thick polycarbonate stock sheet measures 27 inches in length and 25 inches in width. Polycarbonate offers an unparalleled combination of impact resistance (significantly higher than acrylic or glass), excellent optical clarity, and good dimensional stability across a wide temperature range. Its inherent toughness makes it suitable for applications where sudden loads or impacts are anticipated, ensuring operational safety and component longevity in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Carefully align the polycarbonate sheet with the mounting points. 3. Secure using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without proper consideration for expansion/contraction. | Utilize oversized holes and slotted fasteners with appropriate washers to accommodate thermal expansion and contraction of the polycarbonate. |
| Applying excessive force during installation, leading to stress concentrations. | Apply fasteners gradually and evenly. If drilling, use sharp drill bits designed for plastics and maintain consistent pressure. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding for automated assembly lines, Impact shields for material handling equipment, Specialized structural components in lifting apparatus.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||