This 0.109-inch thick polycarbonate stock sheet offers superior impact resistance and optical clarity, making it an exceptional choice for demanding hydraulic system components.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.109" |
| Length | 23" |
| Width | 39" |
Precision-manufactured to tight tolerances, this 0.109-inch thick polycarbonate sheet measures 23 inches by 39 inches. Engineered from high-impact polycarbonate, it exhibits excellent tensile strength and dimensional stability, crucial for withstanding pressurized hydraulic environments. Its inherent chemical resistance protects against many hydraulic fluids, while its transparency allows for visual monitoring of fluid levels or internal mechanisms. This material's excellent electrical insulation properties are also beneficial in sensitive hydraulic control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully position the polycarbonate sheet, aligning all mounting holes. 3. Secure the sheet using appropriate fasteners, avoiding overtightening to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that may stress the polycarbonate. | Employ fasteners with washers to distribute load and consider using self-tapping screws designed for plastic if drilling is required. |
| Exposing the sheet to solvents that can degrade polycarbonate. | Verify compatibility with all chemicals present in the hydraulic system before installation. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Sight glasses for hydraulic reservoirs, Protective guards for hydraulic equipment, Clear covers for hydraulic control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||