This robust 0.108-inch thick polycarbonate sheet offers exceptional impact resistance and clarity. Measuring 48 inches by 37 inches, it provides a versatile, shatterproof solution for demanding industrial and commercial applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.108" |
| Length | 48" |
| Width | 37" |
Trusted by engineers across multiple sectors, this 0.108" thick polycarbonate stock sheet, measuring 48" in length and 37" in width, delivers an outstanding balance of impact strength and optical clarity. Engineered from high-grade polycarbonate resin, it exhibits superior shatter resistance, UV stability, and a wide operating temperature range, making it suitable for applications requiring robust protection and visibility. Its inherent toughness minimizes breakage risks during fabrication and installation, ensuring long-term performance in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Cut sheet to size using appropriate tools, avoiding excessive heat. 3. Secure sheet using non-abrasive fasteners, allowing for thermal expansion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits without proper technique can cause cracking. | Employ a sharp twist drill bit designed for plastics, drilling slowly with a slight pecking motion and adequate cooling. |
| Over-tightening fasteners leading to stress cracks. | Use washers and do not fully tighten fasteners until all are in place, allowing for expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards and safety shields, Glazing and architectural panels, Point-of-purchase displays and signage.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||