This robust 0.039-inch thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Engineered for stringent pulling and lifting applications, it provides a reliable protective barrier in harsh industrial settings.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.039" |
| Length | 15" |
| Width | 28" |
Designed for demanding industrial environments, this 0.039" thick polycarbonate stock sheet exhibits superior impact strength and dimensional stability, crucial for safety in pulling and lifting operations. Its transparency allows for visual inspection, while the material's inherent toughness resists shattering and abrasion. The 15" x 28" dimensions provide ample coverage for various protective shielding and component fabrication needs. Polycarbonate's wide operating temperature range and chemical resistance further enhance its suitability for challenging industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris. 2. Position the polycarbonate sheet according to the application's design. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid stress points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are too small or too few. | Utilize appropriately sized and spaced fasteners, such as bolts with washers, to distribute load and prevent sheet deformation or failure. |
| Overtightening fasteners, causing stress concentrations. | Tighten fasteners snugly but avoid overtightening. Use a torque wrench if precise control is required, especially in critical lifting applications. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding for dynamic equipment, Protective shields for material handling equipment, Component fabrication for industrial fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||