This robust 0.707-inch thick polycarbonate sheet offers superior impact resistance and optical clarity. Its exceptional durability and weatherability make it ideal for demanding industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.707" |
| Length | 20" |
| Width | 47" |
A high-performance industrial component, this 0.707" thick polycarbonate stock sheet measures 20" in length and 47" in width. Engineered from premium-grade polycarbonate resin, it boasts an exceptionally high impact strength (Izod notched impact strength typically exceeding 600 J/m), excellent optical clarity, and inherent UV resistance, preventing yellowing and degradation under prolonged sun exposure. Its wide operating temperature range (-40°C to 120°C) and good chemical resistance further enhance its suitability for diverse industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with mounting points or desired layout. 3. Secure the sheet using appropriate fasteners (e.g., machine screws with large washers) to distribute load and prevent stress concentrations. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using fasteners that are too small or over-tightening, leading to cracking or stress fractures. | Utilize appropriately sized fasteners with large diameter washers to distribute pressure evenly across the polycarbonate surface. Apply only sufficient torque to achieve a secure fit without deforming the material. |
| Drilling holes too close to the edge, compromising structural integrity. | Maintain a minimum edge distance for drilled holes, typically at least 2-3 times the hole diameter, to prevent stress concentration and potential tearing or cracking. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding, Glazing and protective shields, Industrial lighting covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||