Engineered for extreme durability, this 0.504" thick polycarbonate stock sheet offers superior impact resistance and optical clarity, ideal for high-traffic plumbing and janitorial environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.504" |
| Length | 31" |
| Width | 36" |
Specified by design engineers worldwide, this 0.504" thick Polycarbonate Stock Sheet (31" x 36") is a high-performance material for demanding industrial applications. Its inherent toughness and shatter resistance significantly outperform traditional glazing materials, making it ideal for protective barriers, machine guards, and specialized containment solutions. The material exhibits excellent chemical resistance to many common cleaning agents and industrial fluids, ensuring long-term integrity in corrosive environments. Its high impact strength minimizes the risk of catastrophic failure, crucial for safety-critical installations in plumbing and janitorial facilities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and free of debris. 2. Carefully measure and cut the polycarbonate sheet to the required dimensions using appropriate cutting tools for plastic. 3. Secure the sheet using corrosion-resistant fasteners, ensuring even pressure distribution to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metal drilling bits without proper technique. | Utilize a sharp drill bit specifically designed for plastics. Start at a slow RPM and avoid excessive pressure to prevent chipping or melting. |
| Over-tightening fasteners, causing stress points. | Employ washers and avoid direct contact between fasteners and the polycarbonate. Tighten until snug, not until the material deforms. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective barriers in high-traffic areas, Machine guards for cleaning equipment, Sight glasses and inspection panels in fluid systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||