This 0.315-inch thick polycarbonate stock sheet (43" x 42") offers exceptional impact resistance and clarity. Ideal for protective shielding and components in demanding hydraulic environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.315" |
| Length | 43" |
| Width | 42" |
Manufactured under strict quality controls, this 0.315-inch polycarbonate sheet provides superior impact strength and excellent optical clarity. Its nominal dimensions of 43 inches by 42 inches make it suitable for fabrication into a wide range of hydraulic system components. Polycarbonate's inherent toughness and resistance to abrasion ensure longevity in high-pressure environments, while its excellent impact performance mitigates the risk of catastrophic failure. It exhibits good chemical resistance to many hydraulic fluids and oils, making it a reliable material choice for custom guards, sight glasses, and protective enclosures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks and deformation. | Use washers to distribute pressure and tighten fasteners incrementally and evenly. |
| Using abrasive cleaning agents or tools that scratch the polycarbonate surface. | Clean with mild soap and water using a soft cloth. Avoid harsh chemicals and abrasive pads. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic system guards, Sight glasses and viewing windows, Protective enclosures for hydraulic components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||