Engineered for extreme resilience, this 0.076" polycarbonate stock sheet offers superior impact resistance. Its robust construction makes it ideal for demanding pulling and lifting applications where failure is not an option.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.076" |
| Length | 35" |
| Width | 32" |
Purpose-built for heavy-duty applications, this 0.076" thick polycarbonate stock sheet (35" width x 32" length) delivers exceptional durability. Its high impact strength and shatter resistance are critical for safety in dynamic pulling and lifting operations. Polycarbonate's inherent toughness, even at low temperatures, ensures consistent performance under stress, resisting cracking and deformation. This material's excellent abrasion resistance further enhances its longevity in abrasive environments, making it a reliable component for robust industrial equipment and custom rigging solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully align the polycarbonate sheet with pre-drilled holes or mounting points. 3. Securely fasten the sheet using appropriate hardware, avoiding overtightening which can cause stress fractures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without proper washers. | Utilize large-diameter washers to distribute load and prevent stress concentration around fastener holes. |
| Drilling holes too close to the edge. | Maintain adequate edge distance (minimum 1.5x material thickness) when drilling holes to prevent cracking. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective guards for heavy machinery in pulling operations, Reinforcement plates for lifting slings and rigging components, Impact-resistant shields for material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||