This high-impact polycarbonate stock sheet, measuring 0.106" x 14" x 28", is engineered for demanding pressure and temperature control environments. Its robust properties ensure reliable performance and longevity.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.106" |
| Length | 14" |
| Width | 28" |
Built to exacting engineering tolerances, this 0.106" thick polycarbonate sheet offers exceptional clarity and a high strength-to-weight ratio. Designed for applications requiring resistance to both pressure and temperature fluctuations, its inherent impact strength exceeds that of glass, while maintaining excellent thermal insulation properties. The material exhibits a low coefficient of thermal expansion, minimizing dimensional changes under varying conditions, making it ideal for seals, enclosures, and protective barriers in HVAC systems, industrial equipment, and laboratory apparatus.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners (e.g., screws with neoprene washers), avoiding overtightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing stress cracks. | Use appropriate washers (e.g., neoprene) and tighten fasteners only until snug, allowing for thermal expansion. |
| Using abrasive cleaning agents that can scratch the surface. | Clean with a mild soap and water solution, or a polycarbonate-specific cleaner. Use a soft cloth. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: HVAC system enclosures, Protective guards for industrial machinery, Laboratory equipment shielding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||