Engineered from high-impact polycarbonate, this 0.630-inch thick stock sheet offers superior durability and clarity for robust plumbing and janitorial solutions. Its exceptional strength makes it ideal for demanding environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.630" |
| Length | 38" |
| Width | 16" |
Precision-manufactured to tight tolerances, this 0.630-inch thick polycarbonate stock sheet measures 38 inches in length and 16 inches in width. Polycarbonate offers an unparalleled combination of high impact strength, excellent optical clarity, and good chemical resistance, making it suitable for applications requiring both transparency and extreme durability. Its inherent UV resistance ensures longevity in exposed environments. This sheet is designed for fabrication into custom guards, enclosures, and protective barriers within plumbing and janitorial settings where resistance to impact and harsh cleaning agents is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Mark and drill mounting holes on the polycarbonate sheet and the substrate, ensuring appropriate clearance for fasteners. 3. Securely fasten the polycarbonate sheet using appropriately sized and corrosion-resistant hardware, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits without proper technique, leading to cracking. | Utilize a sharp drill bit specifically designed for plastics. Drill slowly and apply moderate pressure. Consider using a pilot hole and then reaming to the final size. |
| Over-tightening fasteners, causing stress concentration and potential failure. | Employ washers to distribute pressure evenly and tighten fasteners only until snug. Avoid using power tools for final tightening. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective guards for equipment in janitorial closets, Custom splash guards for sinks and drains, Machine enclosures for automated cleaning systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||