This 0.703-inch thick Polycarbonate stock sheet offers superior impact strength, excellent optical clarity, and broad chemical resistance. Ideal for fabrication and protection in demanding environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.703" |
| Length | 16" |
| Width | 48" |
Built to exacting engineering tolerances, this 0.703" thick Polycarbonate stock sheet measures 16" in length and 48" in width. Engineered from high-grade polycarbonate resin, it exhibits exceptional impact resistance exceeding 150 J/m, a tensile strength of 60 MPa, and a flexural modulus of 2.3 GPa. Its inherent UV stability and wide operating temperature range (-40°C to 120°C) make it suitable for applications requiring long-term durability and optical performance in harsh conditions, including machine guards, glazing, and protective barriers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free from debris. 2. Carefully position the polycarbonate sheet, aligning it with the desired mounting points or frame. 3. Secure the sheet using appropriate fasteners, ensuring they do not over-tighten to prevent stress cracking. Utilize oversized holes and consider thermal expansion coefficients.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress concentration and potential cracking. | Use neoprene washers or grommets with fasteners to distribute load and allow for thermal expansion. Ensure fasteners are snug but not excessively tight. |
| Using inappropriate cleaning agents that can damage the polycarbonate surface. | Clean with mild soap and water. Avoid abrasive cleaners, ammonia-based solvents, or aggressive degreasers, which can cause crazing or degradation. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Glazing, Industrial Signage.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||