This robust 0.707-inch thick polycarbonate stock sheet is engineered for demanding hydraulic systems. Offering exceptional impact strength and clarity, it's a reliable solution for critical fluid containment and protection.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.707" |
| Length | 41" |
| Width | 37" |
A high-performance industrial component, this 0.707-inch thick polycarbonate stock sheet (41" x 37") is manufactured from virgin polycarbonate resin, renowned for its superior impact resistance, optical clarity, and excellent dimensional stability. Its inherent toughness makes it ideal for applications subjected to high pressures, potential impacts, and corrosive fluids commonly found in hydraulic systems. The material's broad operating temperature range further enhances its suitability for diverse environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Precisely cut the polycarbonate sheet to the required dimensions using appropriate cutting tools designed for plastics. 3. Secure the sheet using mechanical fasteners, ensuring even pressure distribution to avoid stress concentrations. Consider using gasketed fasteners for improved sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polycarbonate. | Utilize sharp, carbide-tipped blades specifically designed for cutting plastics to prevent chipping and cracking. |
| Over-tightening fasteners, leading to stress cracks. | Apply fasteners with moderate torque and consider using washers or a continuous gasket to distribute load evenly. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic fluid reservoirs, Machine guards for hydraulic equipment, Sight glasses in hydraulic lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||