This robust 0.398" thick polycarbonate stock sheet is engineered for critical pulling and lifting applications. Its exceptional impact resistance and dimensional stability ensure reliable performance under extreme stress.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.398" |
| Length | 18" |
| Width | 20" |
Specified by design engineers worldwide, this 0.398" thick polycarbonate stock sheet offers an optimal balance of strength and flexibility for demanding applications. Measuring 18 inches in length by 20 inches in width, its inherent toughness and high impact resistance (up to 250 times that of glass) make it ideal for components subjected to dynamic loads and potential impacts. The material's excellent clarity, coupled with its resistance to chemicals and weathering, further enhances its suitability for use in challenging industrial environments where visibility and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of contaminants. 2. Precisely align the polycarbonate sheet with pre-drilled mounting holes or attachment points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing localized stress and potential cracking. | Use washers and tighten fasteners incrementally and evenly to distribute load and prevent over-compression. |
| Exposing the sheet to incompatible chemicals that can degrade the polycarbonate. | Consult the material's chemical resistance chart and avoid contact with aggressive solvents or cleaning agents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards for heavy-duty equipment, Impact-resistant shields in material handling systems, Custom fabrication for specialized lifting fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||