A robust and optically clear polycarbonate stock sheet engineered for demanding plumbing and janitorial environments. Its superior impact resistance and chemical stability ensure long-lasting performance.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.191" |
| Length | 22" |
| Width | 45" |
A high-performance industrial component, this 0.191-inch thick polycarbonate sheet offers exceptional impact strength and clarity. Measuring 22 inches by 45 inches, it provides a substantial surface area for fabrication and installation. Polycarbonate's inherent resistance to a wide range of chemicals makes it ideal for environments exposed to cleaning agents and wastewater. Its broad operating temperature range further enhances its suitability for diverse plumbing and janitorial systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and dry before application. 2. Cut sheet to desired dimensions using appropriate cutting tools for polycarbonate. 3. Secure sheet using compatible fasteners or adhesives, ensuring a watertight seal if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polycarbonate. | Utilize sharp, high-speed steel or carbide-tipped blades specifically recommended for cutting plastics to prevent chipping and cracking. |
| Over-tightening fasteners, leading to stress cracking. | Use washers and avoid overtightening screws. Allow for thermal expansion by drilling oversized holes or using slotted mounting points. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective barriers in washdown areas, Custom enclosures for janitorial equipment, Replacement panels for plumbing infrastructure.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||