High-performance 0.309-inch thick polycarbonate sheet, precisely cut to 48"x21". Engineered for demanding pressure and temperature control environments, providing robust protection and excellent visibility.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.309" |
| Length | 48" |
| Width | 21" |
Manufactured under strict quality controls, this 0.309" thick polycarbonate stock sheet offers exceptional impact strength, superior clarity, and excellent thermal insulation properties. Its dimensions of 48" length and 21" width make it suitable for a wide range of industrial fabrication and custom component creation within pressure and temperature control systems. Polycarbonate's inherent flame retardancy and UV resistance further enhance its suitability for rigorous operational conditions, ensuring longevity and reliable performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet according to design specifications. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polycarbonate, leading to chipping or melting. | Employ specialized polycarbonate cutting tools (e.g., fine-tooth blades, laser cutting) and maintain appropriate feed rates. |
| Applying excessive clamping pressure during installation, causing material stress and potential failure. | Utilize a controlled fastening method with appropriate washers or grommets to distribute load evenly and prevent point stress. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Pressure vessel sight glass, Temperature control system enclosures, Industrial machine guarding in high-temperature zones.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||