This 0.991-inch thick polycarbonate stock sheet, measuring 14 inches by 43 inches, is engineered for exceptional strength and resilience in rigorous pulling and lifting applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.991" |
| Length | 14" |
| Width | 43" |
Engineered for reliability and performance, this polycarbonate stock sheet boasts a substantial 0.991-inch thickness, providing exceptional structural integrity and impact resistance crucial for demanding pulling and lifting operations. Its robust polycarbonate composition offers excellent clarity, UV stability, and a wide operating temperature range, ensuring consistent performance in diverse industrial environments. Ideal for custom fabrication of specialized lifting fixtures, protective barriers, or impact-resistant components within material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly. 2. Position the polycarbonate sheet according to design specifications. 3. Secure the sheet using appropriate fasteners designed for polycarbonate, ensuring even pressure distribution to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using fasteners that are too small or too sharp, leading to cracking. | Utilize appropriately sized, blunt-tip fasteners with washers to distribute load and prevent stress points. |
| Over-tightening fasteners, causing material deformation or cracking. | Hand-tighten fasteners initially, then snug them down moderately. Avoid excessive force, especially when using power tools. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Custom fabricated lifting slings and straps, Impact-resistant protective guards for lifting equipment, Reinforced components in conveyor and material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||