This robust 0.924-inch thick polycarbonate sheet is engineered for extreme durability and impact resistance. Its substantial thickness provides exceptional strength for demanding industrial and commercial environments, ensuring long-lasting performance.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.924" |
| Length | 35" |
| Width | 46" |
Purpose-built for heavy-duty applications, this polycarbonate stock sheet offers unparalleled impact strength and a high level of clarity. With dimensions of 0.924 inches in thickness, 35 inches in width, and 46 inches in length, it is ideally suited for environments requiring superior protection against physical forces. Polycarbonate exhibits excellent thermal stability and UV resistance, making it suitable for both indoor and outdoor installations where durability and transparency are paramount. Its inherent toughness minimizes the risk of shattering or cracking under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and structurally sound. 2. Accurately measure and cut the polycarbonate sheet using appropriate tools designed for plastic. 3. Secure the sheet using pre-drilled holes and oversized washers to accommodate thermal expansion, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to cracking. | Maintain an adequate edge distance (at least 2x the hole diameter) when drilling. |
| Over-tightening fasteners, causing stress concentrations and potential failure. | Use washers and do not tighten fasteners beyond snug, allowing for material expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards and safety shields, Industrial glazing and partitions, Protective barriers and enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||