This robust 0.910-inch thick polycarbonate stock sheet offers superior impact resistance and clarity, making it an exceptional material for demanding pulling and lifting applications in industrial environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.910" |
| Length | 33" |
| Width | 28" |
A proven choice for industrial professionals, this polycarbonate stock sheet boasts a substantial 0.910" thickness, measuring 33" in length and 28" in width. Engineered from high-performance polycarbonate, it exhibits exceptional impact strength, shatter resistance, and good optical clarity. These properties make it well-suited for fabricating components subjected to significant mechanical stress, abrasion, and potential impact, commonly found in custom jigs, protective guards for heavy machinery, and structural elements within pulling and lifting apparatus.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly before application. 2. Use appropriate fasteners designed for polycarbonate, ensuring proper hole sizing to prevent stress cracking. 3. Apply consistent pressure during assembly, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too small, causing stress concentration and cracking. | Always drill holes for fasteners slightly larger than the fastener diameter to allow for thermal expansion and contraction. |
| Using standard metalworking tools without appropriate modifications. | Utilize sharp, specialized bits designed for plastics and maintain a slow, steady feed rate to prevent melting and chipping. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Custom machine guards and enclosures, Protective shields for heavy equipment, Fabricated components for material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||