This robust polycarbonate stock sheet is engineered for extreme durability in pulling and lifting operations. Its superior impact resistance and optical clarity make it ideal for safety shields and structural components.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.904" |
| Length | 15" |
| Width | 37" |
A high-performance industrial component, this 0.904-inch thick polycarbonate stock sheet, measuring 15 inches by 37 inches, is manufactured from advanced polymer resins. This material offers exceptional tensile strength and elongation, providing resilience against heavy loads and repeated stress cycles inherent in pulling and lifting applications. Its inherent toughness ensures it can withstand significant impact without catastrophic failure, crucial for operator safety and equipment protection. The sheet's dimensional stability under varying temperatures further enhances its reliability in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly. 2. Align the polycarbonate sheet precisely with the intended mounting points. 3. Secure the sheet using appropriate industrial fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing stress concentration and potential cracking. | Use washers and avoid excessive torque when securing the sheet. Hand-tighten and then apply minimal additional turns. |
| Using incompatible cleaning agents that can degrade polycarbonate. | Employ only mild soap and water or specialized polycarbonate cleaners. Avoid abrasive chemicals and solvents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards and shields in heavy machinery, Impact-resistant windows for material handling equipment, Protective covers for lifting mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||