This robust 0.854-inch thick polycarbonate stock sheet is engineered for demanding pulling and lifting applications. Its exceptional strength and impact resistance ensure reliable performance in challenging industrial environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.854" |
| Length | 35" |
| Width | 22" |
Engineered for reliability and performance, this 0.854" thick polycarbonate stock sheet boasts superior impact strength, shatter resistance, and a high tensile strength essential for heavy-duty pulling and lifting operations. With dimensions of 35" in length and 22" in width, it offers substantial surface area for custom fabrication. The material's inherent UV resistance and wide operating temperature range make it suitable for both indoor and outdoor industrial use, providing a durable and long-lasting solution for load-bearing components and protective shielding.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning all mounting holes. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits without proper technique, leading to chipping or cracking. | Utilize a high-speed steel drill bit with a sharp point angle and a slow, steady feed rate. Apply a cutting fluid to aid in cooling and lubrication. |
| Over-tightening fasteners, causing localized stress and potential material failure. | Employ washers and tighten fasteners incrementally, ensuring an even distribution of pressure across the sheet. Torque wrenches are recommended for precise fastening. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Heavy-duty protective shielding for machinery., Custom fabricated components for pulling rigs., Impact-resistant guards in material handling systems..
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||