This heavy-duty polycarbonate stock sheet offers exceptional impact resistance and clarity for critical hydraulic system components. Engineered for durability and reliable performance in harsh industrial settings.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.781" |
| Length | 38" |
| Width | 33" |
Designed for demanding industrial environments, this 0.781-inch thick polycarbonate stock sheet provides superior impact strength, abrasion resistance, and excellent optical clarity. Its robust material composition ensures longevity under high-pressure hydraulic conditions, resisting common chemicals and extreme temperatures. With dimensions of 38 inches by 33 inches, it is ideally suited for fabricating custom guards, sight glasses, manifold components, and protective enclosures within hydraulic machinery, offering a reliable and transparent barrier solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners (e.g., bolts, screws) with washers to distribute load and prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing stress cracks or deformation. | Use washers and tighten fasteners only until snug, avoiding excessive force. |
| Using abrasive cleaning agents or tools that can scratch the polycarbonate surface. | Clean with mild soap and water, using a soft cloth or sponge. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic system sight glasses, Machine guards for hydraulic equipment, Protective enclosures for fluid power components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||