This robust polycarbonate stock sheet offers exceptional impact resistance and thermal insulation properties, making it ideal for demanding heating and cooling applications. Its high clarity and durability ensure long-term performance in industrial environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.672" |
| Length | 42" |
| Width | 15" |
Built to exacting engineering tolerances, this 0.672-inch thick polycarbonate sheet measures 42 inches in length and 15 inches in width. Engineered for superior thermal insulation, it exhibits a low coefficient of thermal expansion and excellent UV resistance, preventing degradation from sunlight. Its inherent strength and impact resistance make it suitable for protective shielding in HVAC systems, environmental enclosures, and demanding industrial glazing where thermal management is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Accurately measure and cut the polycarbonate sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using the specified fasteners, ensuring a snug fit to prevent air or moisture ingress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or uneven edges. | Utilize sharp, fine-toothed saw blades specifically designed for cutting polycarbonate or acrylic to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the polycarbonate. | Apply fasteners evenly and avoid excessive torque. Use washers to distribute pressure and allow for slight thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: HVAC system enclosures, Industrial glazing for climate control, Protective shielding for sensitive equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||