This robust polycarbonate stock sheet offers exceptional impact resistance and clarity. Engineered for demanding pulling and lifting applications, it provides superior durability and safety in challenging environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.589" |
| Length | 47" |
| Width | 37" |
Specified by design engineers worldwide, this 0.589-inch thick polycarbonate sheet measures 47 inches in length and 37 inches in width. Its high tensile strength and shatter-resistant properties make it ideal for load-bearing components in pulling and lifting equipment, including protective guards, chutes, and impact surfaces where visual monitoring is also critical. The material's inherent UV resistance and wide operating temperature range ensure performance longevity under rigorous industrial conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely align the polycarbonate sheet with pre-drilled mounting holes or designated support structures. 3. Secure the sheet using appropriate fasteners (e.g., bolts, rivets) with washers to distribute load evenly and prevent over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without washers, leading to localized stress and potential cracking. | Always use appropriately sized washers with fasteners to distribute pressure across the polycarbonate surface. |
| Drilling holes too close to the edge or with improper bit size, causing stress concentrations. | Maintain adequate edge distance for all drilled holes and use a sharp drill bit designed for plastics to prevent chipping and cracking. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective machine guarding for lifting mechanisms, Chute liners and wear surfaces in material handling, Impact shields for automated equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||