This premium Polycarbonate stock sheet is engineered for robust hydraulic systems. Its exceptional impact strength, clarity, and dimensional stability ensure reliable performance under pressure.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.572" |
| Length | 43" |
| Width | 47" |
A high-performance industrial component, this 0.572" thick polycarbonate stock sheet offers superior impact resistance, clarity, and weatherability. Its inherent toughness makes it ideal for guarding hydraulic components against impact and environmental factors. With dimensions of 43" x 47", it provides ample material for custom fabrication of guards, sight glasses, and protective covers within demanding hydraulic environments where durability and visibility are paramount. The material's resistance to a wide range of chemicals further enhances its suitability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove debris and contaminants. 2. Precisely measure and cut the polycarbonate sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using vibration-resistant fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracking. | Utilize washers and avoid excessive torque when fastening; consider slotted holes for thermal expansion. |
| Using inappropriate cutting tools that cause chipping or melting. | Employ sharp, specialized polycarbonate cutting blades and maintain proper cutting speeds to prevent heat buildup. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic system guards, Sight glasses and inspection panels, Protective enclosures for fluid power components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||