Engineered for extreme environments, this 0.513-inch thick polycarbonate stock sheet offers unparalleled impact resistance and structural integrity for critical pulling and lifting applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.513" |
| Length | 36" |
| Width | 17" |
Specified by design engineers worldwide, this 0.513" thick polycarbonate stock sheet (36" x 17") leverages the inherent toughness and high tensile strength of polycarbonate. Its exceptional impact resistance, exceeding that of glass by a significant margin, makes it ideal for applications subjected to sudden shock loads, abrasion, and extreme forces. The material's inherent UV stability and wide operating temperature range ensure consistent performance in diverse environmental conditions, contributing to the reliability of rigging components, lifting fixtures, and protective barriers in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from any contaminants. 2. Carefully position the polycarbonate sheet according to the design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fastening methods, such as robust bolts with large washers to distribute load, avoiding over-tightening which can cause stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge without proper reinforcement. | Maintain adequate edge distance for all fasteners; consider reinforcing the area around holes with backing plates if stress analysis indicates potential failure. |
| Using standard fasteners that may not withstand the operational forces. | Employ high-tensile strength fasteners specifically designed for dynamic load applications, ensuring they are compatible with polycarbonate to prevent chemical degradation. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Reinforced structural components for industrial lifting equipment, Protective shielding for heavy-duty winch mechanisms, Impact-resistant elements in specialized pulling apparatus.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||