This robust Polycarbonate stock sheet offers superior impact resistance and optical clarity. Engineered for demanding applications, its substantial thickness ensures durability and structural integrity for a wide range of projects.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.434" |
| Length | 31" |
| Width | 24" |
Specified by design engineers worldwide, this 0.434-inch thick Polycarbonate stock sheet is manufactured to exacting standards for critical applications. Measuring 31 inches in length and 24 inches in width, it boasts exceptional impact strength, high temperature resistance, and excellent optical clarity. Polycarbonate's inherent toughness makes it ideal for protective glazing, machine guards, displays, and custom fabrication where durability and visibility are paramount. Its rigidity at this thickness provides significant structural support.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Carefully position the Polycarbonate sheet, allowing for thermal expansion if applicable. 3. Secure the sheet using appropriate hardware, avoiding over-tightening that could cause stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge without relief cuts. | Maintain adequate edge distance for drilled holes and consider adding small relief cuts at corners to prevent stress concentration. |
| Using abrasive cleaning agents or tools that scratch the surface. | Clean with a mild soap and water solution and a soft, non-abrasive cloth. Avoid harsh chemicals or mechanical scrubbing. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guards, Protective Glazing, Signage Substrates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||