This high-performance polycarbonate stock sheet is engineered for demanding pulling and lifting operations. Its exceptional impact resistance and durability ensure reliable performance in rigorous industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.395" |
| Length | 35" |
| Width | 43" |
Manufactured under strict quality controls, this 0.395" thick polycarbonate stock sheet measures 35" in length and 43" in width. It offers superior impact strength, excellent optical clarity, and broad temperature resistance, making it ideal for protective shielding, guide rails, and structural components in material handling systems. Its lightweight yet robust nature contributes to efficient operation and longevity. Meets industry standards for material integrity and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris. 2. Accurately mark and cut the polycarbonate sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using designated fasteners, ensuring even pressure distribution to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits without proper technique | Utilize a sharp bit specifically designed for plastics, and drill at a moderate speed with light pressure to avoid cracking. |
| Over-tightening fasteners, causing stress fractures | Employ washers and do not overtighten screws or bolts; hand-tighten plus a quarter turn is typically sufficient. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective shielding for lifting equipment, Guide rails in conveyor systems, Impact-resistant barriers in material handling areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||