This 0.339-inch thick polycarbonate stock sheet is engineered for the rigorous demands of hydraulic systems. Its superior impact resistance and chemical inertness ensure reliable performance in challenging environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.339" |
| Length | 16" |
| Width | 20" |
Engineered for reliability and performance, this polycarbonate stock sheet measures 0.339 inches in thickness, 16 inches in length, and 20 inches in width. Composed of high-impact polycarbonate, it exhibits excellent tensile strength and a high modulus of elasticity, making it ideal for fluid containment and pressure-bearing components within hydraulic circuits. Its broad operating temperature range and resistance to common hydraulic fluids and oils ensure longevity and prevent degradation under operational stress. Dimensional stability is maintained across varying conditions, crucial for precise fitting and sealing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Carefully measure and cut the polycarbonate sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using compatible fasteners, ensuring even pressure distribution to avoid stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits that can cause cracking. | Employ specialized polycarbonate drill bits or pilot holes with a slow speed and light pressure. |
| Over-tightening fasteners, leading to stress fractures. | Use washers and tighten fasteners only until snug, allowing for slight expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic fluid reservoirs and sight glasses, Protective guards for hydraulic machinery, Manifold components and fluid transfer lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||