This premium polycarbonate stock sheet offers exceptional strength and impact resistance, making it ideal for robust pulling and lifting applications. Its specific dimensions ensure compatibility with a wide range of industrial setups.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.329" |
| Length | 22" |
| Width | 34" |
Precision-manufactured to tight tolerances, this 0.329-inch thick polycarbonate sheet measures 22 inches in width and 34 inches in length. Engineered from high-impact polycarbonate, it exhibits superior tensile strength, abrasion resistance, and excellent clarity. Its inherent toughness allows it to withstand significant loads and repeated stress cycles common in pulling and lifting equipment, such as specialized jigs, custom bracing, and protective guards for machinery. The material's lightweight nature, compared to traditional metals, also contributes to improved handling and reduced system weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully align the polycarbonate sheet with pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing localized stress and potential cracking. | Use washers to distribute load and tighten fasteners incrementally until snug, avoiding excessive force. |
| Exposing the sheet to harsh chemicals that can degrade polycarbonate. | Consult chemical compatibility charts and use only approved cleaning agents and sealants. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Custom jigs and fixtures for material handling, Protective shielding for lifting equipment, Reinforcement plates in pulling mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||