This robust 0.313-inch thick polycarbonate sheet, measuring 36 by 30 inches, is engineered for high-impact scenarios within pulling and lifting operations, offering exceptional durability and safety.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.313" |
| Length | 36" |
| Width | 30" |
A proven choice for industrial professionals, this 0.313" thick polycarbonate stock sheet (36" L x 30" W) is manufactured from a high-performance polymer known for its superior impact strength and clarity. Its inherent toughness makes it ideal for applications where resistance to fracturing and shattering under stress is paramount. The material's excellent tensile strength and rigidity ensure reliable performance in demanding pulling and lifting environments, providing a secure and durable interface for equipment and personnel.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning any pre-drilled holes with mounting hardware. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening which can cause stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are too short or too long. | Utilize fasteners of appropriate length and thread type for secure, flush mounting without damaging the polycarbonate. |
| Drilling holes too close to the edge of the sheet. | Maintain adequate edge distance when drilling holes to prevent stress concentration and potential cracking. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding in lifting equipment, Impact shields for material handling, Protective covers for pulley systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||