This robust polycarbonate stock sheet offers exceptional impact resistance and clarity, making it the superior choice for demanding hydraulic applications. Its precise dimensions ensure seamless integration into existing systems.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.305" |
| Length | 32" |
| Width | 21" |
Engineered for reliability and performance, this 0.305" thick polycarbonate stock sheet boasts an impressive 32" length and 21" width. Its inherent toughness, high impact strength, and excellent optical clarity make it ideally suited for hydraulic sight glasses, protective barriers around hydraulic machinery, and robust enclosures. The material exhibits good chemical resistance to many hydraulic fluids and offers a broad operating temperature range, ensuring consistent performance in dynamic industrial environments. Machinability allows for custom fabrication of components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully position the polycarbonate sheet, aligning pre-drilled holes if applicable. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without washers that can concentrate stress. | Utilize flat, wide washers to distribute clamping force evenly across the polycarbonate surface. |
| Drilling holes too close to the edge, leading to potential cracking. | Maintain adequate edge distance for all drilled holes, typically at least twice the hole diameter. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic Sight Glasses, Machine Guards and Protective Barriers, Enclosures for Hydraulic Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||