This robust 0.299" thick polycarbonate stock sheet offers exceptional impact resistance, making it ideal for demanding pulling and lifting applications where durability is paramount.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.299" |
| Length | 16" |
| Width | 19" |
Built to exacting engineering tolerances, this 0.299-inch thick polycarbonate sheet (16 inches in length by 19 inches in width) provides superior strength and clarity. Polycarbonate's inherent toughness and high impact resistance make it an excellent choice for applications requiring protection against severe shock and abrasion. Its dimensional stability ensures consistent performance under load, while its lightweight nature facilitates easier handling and installation in complex pulling and lifting systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Align the polycarbonate sheet precisely with the intended mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks. | Use washers and tighten fasteners gradually until snug, avoiding excessive force. |
| Using incompatible cleaning agents that can degrade the polycarbonate. | Clean with mild soap and water or a specialized polycarbonate cleaner. Avoid abrasive materials and harsh chemicals. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective shields in lifting equipment, Impact-resistant components in material handling systems, Reinforcement plates for pulling mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||