Engineered for demanding pulling and lifting tasks, this 0.290" thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Its robust material properties ensure reliable performance in challenging industrial environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.290" |
| Length | 12" |
| Width | 37" |
Trusted by engineers across multiple sectors, this 0.290" thick, 12" wide, and 37" long polycarbonate stock sheet is manufactured to stringent industry standards. Polycarbonate's inherent high tensile strength, excellent impact toughness, and dimensional stability make it a superior choice for components subjected to dynamic loads and potential shock. Its transparent nature allows for visual inspection of operations, while its resistance to abrasion and many chemicals further enhances its utility in demanding pulling and lifting assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Accurately measure and mark cut lines on the polycarbonate sheet. 3. Securely fasten the cut sheet to the assembly using appropriate hardware, avoiding over-tightening which can induce stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are too short or not designed for plastic, leading to inadequate support. | Utilize fasteners with a wider bearing surface, such as washers, and ensure they are of sufficient length and thread engagement for the polycarbonate thickness. |
| Drilling holes without proper support or technique, causing chipping or cracking. | Support the polycarbonate sheet from underneath when drilling and use sharp drill bits specifically designed for plastics. Initiate drilling at a slow speed. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective guards for winch mechanisms, Impact-resistant cover plates for lifting equipment, Custom shims and spacers in heavy machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||